Accessories
Digitron offers a range of accessories to compliment our instruments for ease of handling, storage, hygiene and protection.
Downloads
Calibration +100oC Test Cap (CC100)
CC100 Calibration + 100 oC Test Cap for use with 2046T thermometer. A simple method for testing the accuracy of your 2146T thermometer.
Calibration +120 oC Test Cap (2146CC6)
2146CC6 Calibration +120 oC Test Cap for use with 2146T and 8146T thermometers only. A simple method for testing the accuracy of your thermometer.
Calibration +120 oC Test Cap (2146CC8)
2146CC8 Calibration +120 oC Test Cap for use with 2146T and 8146T thermometers only. A simple method for testing the accuracy of your thermometer.
Calibration +120oC Test Cap (CC120)
CC120 Calibration +120oC Test Cap for use with 2046T thermometer. A simple method for testing the accuracy of your 2146T thermometer.
Calibration +5 oC Test Cap (2146CC4)
2146CC4 Calibration +5 oC Test Cap for use with 2146T and 8146T thermometers only.
Calibration +5oC Test Cap (CC05)
CC05 Calibration +5 oC Test Cap for use with 2046T thermometer. A simple method for testing the accuracy of your 2146T thermometer.
Calibration +65oC Test Cap (CC65)
CC65 Calibration +65 oC Test Cap for use with 2046T thermometer. A simple method for testing the accuracy of your 2146T thermometer.
Calibration +70 oC Test Cap (2146CC3)
2146CC3 Calibration +70 oC Test Cap for use with 2146T and 8146T thermometers only. A simple method for testing the accuracy of your thermometer.
Calibration +70 oC Test Cap (FM35CC3)
FMCC3 Calibration +70 oC Test Cap for use with thermometer only. A simple method for testing the accuracy of your thermometer.
Calibration -18 oC Test Cap (2146CC1)
2146CC1 Calibration -18 oC Test Cap for use with 2146T and 8146T thermometers only. A simple method for testing the accuracy of your thermometer.
Calibration -18 oC Test Cap (FM35CC1)
FMCC1 Calibration -18 oC Test Cap for use with FM35 thermometer only. A simple method for testing the accuracy of your thermometer.
Remove your temperature probe from the thermometer and plug the test cap in to the probe port. Switch on the thermometer and the thermometer display should read within +/- ½ oC of -18 oC. Use with different temperature range test caps for a calibration test across hot and cold temperatures.
Calibration -18oC Test Cap (CC18)
A simple method for testing the accuracy of your 2146T thermometer.
Calibration Certificate for Instrument & Probe (CAL-CERT-SYS)
Certificates of Calibration, which are often essential as part of quality assurance systems, can be purchased alongside your new instrument.
Calibration Certificate for Instrument Only (CAL-CERT-INST)
Certificates of Calibration, which are often essential as part of quality assurance systems, can be purchased alongside your new instrument.
Calibration Zero oC Test Cap (2146CC2)
2146CC2 Calibration Zero oC Test Cap for use with 2146T and 8146T thermometers only. A simple method for testing the accuracy of your thermometer.
Calibration Zero oC Test Cap (FM35CC2)
FM35CC2 Calibration Zero oC Test Cap for use with FM35 thermometer only. A simple method for testing the accuracy of your thermometer.
Fast Response Flexible Air Probe (FM35-AP)
The FM35-AP is a fast response flexible air probe for your FM35 unit.
Flexible Air Probe (H0000)
H0000 flexible air probe for the non-destructive checking of food temperatures.
Flexible Air Probe (H0000LS)
Thermistor version of T0000with Lumberg connector and straight cable for 2146T thermometer.
Flexible Air Probe (T0000LS)
Flexible Air Probe as T0000 with Lumberg connector and straight cable, 1m long (2106T only).
General Purpose Probe (LCKO234)
Low cost K type sensor, for rapid temperature. 360o finger grip or loop. (No handle)
Key Features
- K type sensor
- strong and fast response
- Suitable for a wide range of applications
- 2 pin mini connector type
- Max tip temp. 1000°C/1832°F
- 100mm/3.9" shaft length
Needle Probe (K0112)
K type sensor, for rapid temperature
Needle Probe (LCT0112)
‘T’ type sensor version of K0112 with Lumberg connector and curly cable. Includes colour coded thumb tabs (2146T only).
Needle Probe (T0112LS)
‘T’ type sensor version of K0112 with Lumberg connector with straight cable 0.7m long. Includes colour coded thumb tabs (2146T only).
Pipe (Velcro) Probe (K0900)
K type sensor, for taking surface temperature measurements of pipes.
Ridged Air Probe (LCK0334)
Low cost K type sensor, for rapid temperature. 360 degree finger grip or loop. (No handle)
Ridged Air Probe (LCT0334)
'T’ type version of K0334 with Lumberg connector and curly cable (2106T only).
Sous-Vide Probe (H0111LC)
For use with 2146T thermometer.
Surface Probe (LCK0454)
Low cost K type sensor, for rapid temperature. 360o finger grip or loop. (No handle)
Surface Probe (LCT0454)
Low cost type sensor. Providing a fast response and comprising of a 3.5mm diameter spring loaded copper disc to allow uniform pressure on surface to be measured.
